Epson EPL-6200 Network Manual page 134

Network Guide
5. Confirm the information about the printer's port you want to configure, and then click
Finish.
Items
Port Type
The port Information
Finish button
Back button
Cancel button
You need to install the printer driver. See "Installing the Printer Driver" on page 137.
Explanations
The following items are listed in the pull-down menu, and you can
select the port type you need.
IP Address(Auto): Configure the port automatically. If the IP
address of the printer is acquired automatically and the
computer and the printer are in the same segment, you can
select this port type.
IP Address(Manual): Use the printer's IP Address for the port
name.
HostName (DNS): Use the printer's host name registered in the
DNS server for the port name.
MS Network: Use the NetBIOS name registered in the printer for
the port name.
The following items are displayed:
- Port Name (If the port type is changed, the port name and the
host name or IP address are also changed.)
- Printer Model
- Host Name or IP Address
- Protocol
Register the port information to the system and close the Add
EpsonNet Print Port Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.
134
Network Software