Ip Address Settings - Epson EPL-6200 Network Manual

Network Guide
TCP/IP

IP Address Settings

Items
Method for Acquiring the IP
Address
IP Address
Subnet Mask
Default Gateway
Set Using Automatic Private IP
Addressing (APIPA)
Set Using PING
DNS Server Address Settings
Items
Acquire DNS Server Address
Automatically
DNS Server Address
Host Name and Domain Name Settings
Items
Acquire Host Name and Domain
Name Automatically
Host Name
Explanations
Select a method for acquiring IP addresses. If Auto is
selected, DHCP becomes available. To use the DHCP
server, make sure it is installed on your computer and
correctly configured. See your operating system's online
help for detailed instructions.
To set the IP address manually, select Manual.
Enter an IP address for the network interface. Be sure the
IP address does not conflict with any other devices on the
network.
Set the subnet mask.
Set the gateway address if needed.
Select Enable to get a private address between
169.254.1.1 and 169.254.254.254 automatically when an IP
address cannot be obtained by the DHCP server;
otherwise, select Disable.
Enables or disables IP address setting using the ping
command.
Explanations
Select either Enable or Disable to acquire the DNS server
address from the DHCP server.
Enter the DNS server address. When the DHCP server does
not respond even Enable is selected for Acquire DNS
server address automatically, the DNS server address set
here is used.
Explanations
Select either Enable or Disable to acquire the host name
and domain name from the DHCP server.
Enter the host name supported by Dynamic DNS
(between 2 and 63 characters). The total number of
characters of the host name and the domain name must
not exceed 251.
123
Network Software