Windows 2000 - Epson EPL-6200 Network Manual

Network Guide

Windows 2000

For Windows 2000, use the following procedure to install the necessary components.
Note:
❏ The Windows 2000 CD-ROM may be required during the installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and
the default gateway of the computer.
1. Click Start, point to Settings, and then select Network and Dial-up Connections. The
Network and Dial-up Connections screen appears.
2. Right-click the desired network connection and then select Properties.
3. Check if the following necessary components are in the list. If they are already installed,
go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, AppleTalk, IPP, SNMP (IP trap)
MS Network
NetWare, SNMP (IPX trap)*
* Only for printers supporting NetWare queue-based printing
Necessary components
Internet Protocol (TCP/IP)
NetBEUI or Internet Protocol (TCP/IP)
Latest Novell Client downloaded from the Novell
Web site
26
How To