Epson EPL-6200 Network Manual page 64

Network Guide
5. From the Output Port list box, select one from \PIPE\LPD0 to \PIPE\LPDn (where n is
the maximum number of LPD ports). The \PIPE\LPD -Settings dialog box will appear.
6. Enter the IP address of the network interface in the LPD server box. Enter the printer
name set in step 2 in the LPD printer box.
7. Close the Printer icon to exit printer configuration.
NetBEUI printing
1. Be sure that IBM OS/2 NetBIOS is installed on your computer.
2. To create a printer, double-click the target printer icon to open the Properties dialog
box. Then click the Output Port tab.
3. Select the port.
4. Connect to the printer from the command line.
Example: Connect the printer to LPT1.
net use LPT1: \\NetBIOS name of network interface\ Device name of network interface
Note:
To change the NetBIOS name and device name, use EpsonNet Config running on Windows.
64
How To