EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Item
Show Total Prints
The Printer Status Menu
These items track printer use and settings.
Item
Print Status Sheet
myEpsonPrinter Status
Firmware Version
The Network Setup Menu
indicates default settings.
Item
IP Address Setting
Auto
Panel
BONJOUR
Print Status Sheet
Restore Settings
The Preference Menu
indicates default settings.
Using the Control Panel Menu
Parameter
2
2
XXXXXX m
(XXXXXX ft
)
Parameter
Print
Not Started, Disabled,
Enabled
Last Uploaded: (Not
Uploaded), MM/DD/YY
HH:MM GMT
XXXXXXX,X_XX,XXXX
Parameter
-
IP: XXX.XXX.XXX.XXX
SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
On
Off
Print
Yes
No
Explanation
Select Show Total Prints to view the total area of media printed (to
a maximum of six figures).
Explanation
Print a status sheet showing current printer settings, and the
status of periodic replacement parts. Use this option to view a
variety of information about the printer on a single sheet and help
schedule the periodic replacement of parts.
You can see if myEpsonPrinter is enabled or disabled. If it is
enabled, the last uploaded time is displayed. This function is not
supported in some areas and some countries.
View the printer Firmware Version.
Explanation
Choose whether IP addresses are obtained automatically (Auto)
using DHCP or manually (Panel). If Panel is selected, enter an IP
address, subnet mask, and default gateway address. Contact your
system administrator for detailed information.
Choose whether Bonjour is used (On), or is not used (Off), in the
network interface.
Select to print the current network status. Use this information for
a complete overview of network settings.
Select Yes to restore all items in the Network Setup menu to their
default settings.
154