Windows Nt 4.0 - Epson EPL-6200 Network Manual

Network Guide

Windows NT 4.0

For Windows NT 4.0, use the following procedure to install the necessary components.
Note:
❏ The Windows NT 4.0 CD-ROM may be required during the installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and
the default gateway of the computer.
1. Click Start, point to Settings, and then select Control Panel.
2. Double-click the Network icon in the Control Panel.
3. Check if the following necessary components are in the list. If they are already installed,
go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, AppleTalk, IPP, SNMP (IP trap)
MS Network
NetWare, SNMP (IPX trap)*
* Only for printers supporting NetWare queue-based printing
Necessary components
TCP/IP
NetBEUI or TCP/IP
Latest Novell Client downloaded from the Novell
Web site
28
How To