Network Guide
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and select Properties.
3. Click the Details tab and select the port you have set with the NET USE command.
Windows Server 2003
For Windows Server 2003, the printer driver installation procedure differs depending on the
printing method you prefer. Epson recommends printing with EpsonNet Print. See "For
Windows XP/Server 2003/2000/NT 4.0 Users" on page 131.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See "About EpsonNet Print" on
page 130 for details.
1. Click Start, and then select Printers and Faxes.
2. Double-click the Add Printer icon to start the Add Printer wizard, and then click Next.
3. Click Local printer attached to this computer, clear the Automatically detect and
install my Plug and Play printer check box, and then click Next.
Note:
You must clear the Automatically detect and install my Plug and Play printer check box
because the printer is attached directly to the network, not to a computer.
48
How To