Macintosh Environment; Netware Environment - Epson EPL-6200 Network Manual

Network Guide

Macintosh environment

Printers do not appear in Chooser.
Cause
You may have selected a wrong
one for "Connect via" in the
AppleTalk Control Panel.
The Bonjour/Rendezvous printer setting is overwritten by the AppleTalk
printer setting.
Cause
The same printer is set up with
AppleTalk after the printer is set up
with Bonjour/Rendezvous.

NetWare environment

For users of printers supporting NetWare queue-based printing
Nothing prints even though clients have sent data to the printer.
Cause
Clients may not be registered, or the
network interface may not be
logged in to the NetWare server.
EpsonNet Config will not start correctly.
Cause
Microsoft NetWare Directory Service
is installed on your computer.
What to do
Make sure to select Ethernet in AppleTalk Control Panel,
and make sure AppleTalk is active in Chooser. Also,
check the network equipment including the hub cable.
What to do
Change the AppleTalk printer name so that it does not
conflict with the Bonjour/Rendezvous printer name.
What to do
Make sure clients are registered as users of the print
queue and the print server. Also, make sure the network
interface is logged in to the NetWare server.
What to do
If you are using the NDS service, install the Novell
NetWare Client service.
164
Troubleshooting