Network Menu - Epson EPL-6200 Network Manual

Network Guide
Note:
❏ To use Auto, a DHCP server must be correctly configured on the network. See the online
help of your operating system for detailed instructions.
❏ Choose PING only when setting the IP address using the arp/ping command.
6. Press the Up or Down button until IP = xxx.xxx.xxx.xxx appears. Press the Enter
button.
7. Press the Up or Down button until the desired value appears. Then press the Enter
button to set the value.
Note:
Repeat steps 7 and 8 to set the IP address, subnet mask, and default gateway.
8. Press the Start button to exit the control panel menus.
9. Turn off your printer and then turn it back on. Be sure to wait until the initialization is
complete.
Print a network status sheet to confirm the new IP address.
Note:
❏ You must first set the IP address before using EpsonNet Config with Web Browser.
❏ See the User's Guide for more information about settings on the printer's control panel.

Network Menu

These items are used to make network settings on the printer's control panel.
Item
Network I/F
Get IPAddress
IP
SM
GW
NetWare
AppleTalk
MS Network
Bonjour
Link Speed
Buffer Size
Settings (default in bold)
On, Off
Panel, Auto, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
On, Off
Auto, 100 Full, 100 Half, 10 Full, 10 Half
Normal, Maximum, Minimum
Tips for Administrator
169