Epson EPL-6200 Network Manual page 78

Network Guide
Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
2. Load the print server from the file server's system console which the print queue
volume is set.
>LOAD PSERVER print server name you set using NWAdmin
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config
User's Guide for details.
If you use the NetWare objects that are already created, you can use EpsonNet Config
with Web Browser too. See "NetWare" on page 122 for details.
Using the EpsonNet NDPS Gateway
This section contains instructions on printing using Novell Distributed Print Services
®
(NDPS ) with Novell
new generation print services of NetWare.
Note:
❏ Banners cannot be printed with NDPS.
❏ The Status Monitor utility cannot be used with NDPS.
❏ Bind the IP or both IP or IPX protocols on the NetWare server that runs NDPSM.NLM and
EPSONGW.NLM.
Check the following points before starting.
❏ Install the appropriate client software, such as Novell Client for Windows 95/98 version
3.4, Novell Client for Windows NT/2000 version 4.8, or Novell Client for Windows XP
version 4.9 on client workstations. Make sure they install NDPS.
❏ When you use the network interface with Bindery (either in the Print Server mode or the
Remote Printer mode), you need PCONSOLE.EXE to create bindery objects such as
Print Server and Print Queue objects. Since PCONSOLE.EXE does not come with
NetWare 5.x/6.0, you need to get the file from Novell.
Outline of settings
The followings are basic steps to use the network interface with the NDPS printing system.
Detailed procedures are described in the subsequent sections.
1. Install EpsonNet NDPS Gateway.
2. Upload printer driver files to the NDPS RMS server.
® ®
NetWare 5.x/6.0. Novell Distributed Print Services (NDPS) is the
®
78
How To