Installing Epsonnet Print; For Windows Xp/Server 2003/2000/Nt 4.0 Users - Epson EPL-6200 Network Manual

Network Guide

Installing EpsonNet Print

Follow the steps below to install EpsonNet Print. Be sure to install it on a computer
connected to the network.
Note:
If EpsonNet Direct Print (the older version of EpsonNet Print) is already installed on your computer,
you need to uninstall it before installing EpsonNet Print (the installation program will lead you
through uninstalling EpsonNet Direct Print 2).
1. Insert the Software CD-ROM in the CD-ROM drive.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the
CD-ROM.
3. Make sure that all applications are closed, and then click the Install Network Utility
button.
4. Click the icon located next to EpsonNet Print.
5. Follow the on-screen instructions to complete the installation.
Your computer is now set up to print using LPR via EpsonNet Print. See the next section
to set up your printer.

For Windows XP/Server 2003/2000/NT 4.0 Users

Follow the steps below to add a port using the Add Printer Wizard.
❏ If you want to add a port for a printer with its IP address assigned automatically by the
DHCP server or router, see Adding a port for a printer assigned with a dynamic IP
address.
❏ If you want to add a port for a printer with its IP address assigned manually, see Adding
a port for a printer assigned with a static IP address.
Note:
❏ Be sure that the computer is connected to the network and TCP/IP is correctly set.
❏ Be sure that the target Epson printer driver is installed on the computer.
❏ A valid IP address must be assigned to the printer.
131
Network Software