Epson EPL-6200 Network Manual page 81

Network Guide
Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and want to install the printer
driver automatically to the client computer, you must create two Printer Agents: one for the
PostScript printer driver and the other for the ESC/Page printer driver. If you create one with
Remote (rprinter on IPX), create the other with Remote (LPR on IP). You can create two Printer
Agents with the LPR protocol (called LPR Printer Agent), but cannot create two Printer Agents with
the IPX protocol (called IPX Printer Agent) for the same printer.
Creating a Printer Agent automatically
You can create a Printer Agent automatically. Only public access printers can be created
in this way. See "Creating Public Access Printers Automatically" in the EpsonNet NDPS
Gateway manual for detailed information.
Note on using the Adobe PostScript 3 Kit:
❏ If the NetWare server is bound with both IP and IPX protocols, two Printer Agents (one being
LPR Printer Agent and the other IPX Printer Agent) are created automatically. When you select
one of the Printer Agents for the PostScript printer driver, select the other for the ESC/Page
printer driver. The Printer Agent name cannot be changed, so be sure to remember which
Printer Agent is associated with the PostScript or ESC/Page printer driver.
❏ If the NetWare server is bound with only IP protocol, only one LPR Printer Agent is created. You
need to create one more LPR Printer Agent manually. Be sure to select Remote (LPR on IP) for
the port handler type and set a unique Printer Agent name so you can tell which Printer Agent
is associated with the PostScript or the ESC/Page printer driver.
❏ If the NetWare server is bound with only IPX protocol, only one IPX Printer Agent is created. In
this case, you cannot create another IPX Printer Agent manually. To avoid this, be sure to bind
both the IP and IPX protocols to the NetWare server first.
Creating a Printer Agent manually
You can create Printer Agents, either public access printers or controlled access printers.
The way to create a Printer Agent differs depending on the printer type you choose.
Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and want to install the printer
driver automatically to the client computer, you must create two Printer Agents: one for the
PostScript printer driver and the other for the ESC/Page printer driver. If you create one with
Remote (rprinter on IPX), create the other with Remote (LPR on IP). You can create two LPR
Printer Agents but cannot create two IPX Printer Agents for the same printer.
1. Select a printer type (either public access printer or controlled access printer).
2. Create a public access printer. If you want to create a controlled access printer, go to
step 3.
In NetWare Administrator, double-click the NDPS Manager you have created. Click
Printer Agent List, and then click New. Type the Printer Agent name, and then select
EpsonNet NDPS Gateway Configuration for the Gateway Type. Click OK. Then go to
step 4.
81
How To