Epson EPL-6200 Network Manual page 165

Network Guide
It takes a long time to start EpsonNet Config.
Cause
The Novell Client service is installed.
The printers on the IPX network do not appear in the EpsonNet Config
dialog box.
Cause
The printer is turned off.
The printer is not in the same
segment as the computer where
you installed EpsonNet Config.
You have not logged in to the
target NetWare server with
supervisor privileges.
Cannot monitor the printer using EPSON Status Monitor.
Cause
You set the NDS Print Server settings
for the printer using EpsonNet
Config for Windows.
For users of printers not supporting NetWare queue-based printing
Nothing prints even though clients have sent data to the printer.
Cause
Clients may not be registered, or the
network interface may not be
working correctly.
What to do
Double-click Network in Control Panel, and then
double-click the network adapter that does not use the
IPX/SPX-compatible protocol. Clear the items related to
IPX to unbind IPX.
What to do
Turn on the printer.
To search for network interfaces in other segments, use
Search options of EpsonNet Config.
From the computer on which EpsonNet Config is
installed, log in to the target NetWare server with
supervisor privileges.
What to do
Re-configure the printer assigned as the print server using
NetWare Administrator.
What to do
Make sure clients are registered as users of the NetWare
server. Also, make sure the network interface is working
correctly.
165
Troubleshooting