Installing Epsonnet Internet Print; Setting Up Your Printer Using Epsonnet Internet Print - Epson EPL-6200 Network Manual

Network Guide

Installing EpsonNet Internet Print

Follow the steps below to install EpsonNet Internet Print.
1. Insert the Software CD-ROM in the CD-ROM drive.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the
CD-ROM.
3. Make sure that all applications are closed, and then click the Install Network Utility
button.
4. Click the icon located next to EpsonNet Internet Print.
5. Follow the on-screen instructions to complete the installation.
6. Restart the computer after the installation is complete.

Setting Up Your Printer Using EpsonNet Internet Print

EpsonNet Internet Print supports printing across the Internet using Internet Printing
Protocol. Follow the steps below to set up the printer.
Note:
Before following the steps below, you must make the appropriate IPP settings in EpsonNet Config.
See the EpsonNet Config User's Guide or "IPP" on page 126 for instructions on setting up IPP. In
the steps below, you will be asked for the IPP URL you set in the IPP setting screen in EpsonNet
Config.
Windows 98/95
1. Make sure that TCP/IP is correctly installed and setup in the computer and a valid IP
address is set for the computer and printer.
2. Make sure that the IPP settings in EpsonNet Config are correct. See the EpsonNet
Config User's Guide or "IPP" on page 126 for instructions on settings for IPP.
3. To start EpsonNet Internet Print, click Start, point to Programs and then EpsonNet
Internet Print, then click Add EpsonNet Internet Print Port.
145
Network Software