Epson EPL-6200 Network Manual page 96

Network Guide
3. Create a printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel-
ormHOSTNAME -orpaux
4. Restart the print service.
For example:
lpshed
5. Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
6. To print, use the lp command.
For example:
lp -DRPrinter Print-File-Name
Setting up for SCO UNIX 4.2 or later (Open Server)
In the following steps, substitute the name that your printer will be known by for
HOSTNAME, and the name by which you want your printer to be known for Rprinter.
1. Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Execute rlpconf to register the printer.
For example:
rlpconf
3. Enter the name of the printer.
For example:
Please enter the printer name (q to quit):RPrinter
4. Specify the remote printer as the printer type.
For example:
Is Rprinter a remote printer or a local printer (r/l)? r
96
How To