Epson EPL-6200 Network Manual page 95

Network Guide
Setting up for IBM AIX 3.2.5 or later and 4.1.3 or later
In the following steps, substitute the name that your printer will be known by for
HOSTNAME, and the name by which you want your printer to be known for Rprinter.
1. Add the IP address and printer host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Run smit.
For example:
smit printer
3. Set the printer name (for example: Rprinter) in:
"Manage Remote Printer""Client Services""Remote Printer Queues""NAME of
queue to add".
Set the host name (for example: HOSTNAME) in:
"DESTINATION HOST for remote jobs".
Set the port name (for example: aux) in:
"Name of QUEUE on remote printer".
4. To print, use the lpr command.
For example:
lpr -PRPrinter Print-File-Name
Setting up for HP-UX 9.05 or later
In the following steps, substitute the name that your printer will be known by for
HOSTNAME, and the name by which you want your printer to be known for Rprinter.
1. Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Terminate the printer service.
For example:
lpshut
95
How To