Windows Me/98 - Epson EPL-6200 Network Manual

Network Guide
5. If the necessary components are not in the list, click Install to install them, as described
below.
For LPR or Internet printing:
Internet Protocol (TCP/IP) is installed by default. You cannot add or delete it.
For Microsoft Network Shared printing:
Select Client and then click Add. Select Client for Microsoft Networks and then click
OK.
For printing via NetWare server:
Download the latest Novell Client from the Novell Web site and install it on the
computer. Also, be sure to install either IP or IPX. See the Novell Web site for detailed
information.
6. For LPR, Internet, Microsoft Network Shared printing:
Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties
dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP
address, the subnet mask, etc. and then click OK.
7. Restart the computer.
The necessary components are now installed. Go to the section "Connecting the Network
Interface to the Network" on page 31.

Windows Me/98

For Windows Me/98, use the following procedure to install the necessary components.
Note:
❏ The Windows Me/98 CD-ROM may be required during the installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and
the default gateway of the computer.
1. Click Start, point to Settings, and then select Control Panel.
21
How To