Starting Epsonnet Webmanager - Epson EPL-6200 Network Manual

Network Guide
4. Click the icon located next to EpsonNet WebManager.
5. Follow the on-screen instructions to complete the installation.
Note:
You do not need to install EpsonNet WebManager in the client computer. Just announce the IP
address or host name of the server to any clients who use EpsonNet WebManager from a client
computer.

Starting EpsonNet WebManager

Be sure that TCP/IP is installed, and the IP address or host name is set for the computer.
(Register the host name in the hosts file in the Windows directory.)
From the server
To start EpsonNet WebManager, click Start, point to Programs (for Windows 2000 and
NT 4.0 users) or All Programs (for Windows XP and Server 2003 users), select
EnsonNet, and then select EpsonNet WebManager. Click EpsonNet WebManager.
For Windows XP Service Pack 2 users:
If EpsonNet WebManager is installed on the computer running Windows XP Service Pack
2, make the following settings; otherwise the client computers cannot access EpsonNet
WebManager.
1. Click Start, point to Control Panel, and then select Security Center. Click Windows
Firewall.
2. Click the Exceptions tab, and then click the Add Port button.
3. Enter the name of the port in the Name text box, and 8090 in the Port number text box,
and then select the TCP radio button.
Note:
If necessary, click the Change scope button, and then specify the IP addresses of the client
computers for which the port is unblocked.
4. Click OK.
155
Network Software