Enterasys SmartSwitch 6000 User Manual page 359

radius
Description:
Enables, disables, and configures RADIUS authentication, which can only be
used when the client has been properly configured and enabled. When the
RADIUS Client is not enabled, the legacy password authentication will run as
before. For more about Radius Client, refer to
Syntax:
radius
radius status
radius [enable | disable]
radius prim_ip <server ip>
radius sec_ip <server ip>
radius prim_ip <server ip>
radius sec_ip <server ip>
radius timeout <n>
radius retry <n>
radius clear
radius prim_auth_port <n>
radius sec_auth_port <n>
radius prim_acct_port <n>
radius sec_acct_port <n>
radius last_resort < [local|remote] [accept|reject|challenge] >
radius prim_secret
radius sec_secret
Built-in Commands
Section 3.6.1.
Network Tools Screens 12-23