Enterasys SmartSwitch 6000 User Manual page 353

maclock (Continued)
Options:
port# | all — Applies MAC locking parameters to a specific ports or to all
ports on the device.
global — Applies MAC locking parameters globally.
firstarrival — Displays MAC locking information about first arrival end
stations connected to the device.
static — Displays MAC locking information about managment defined end
stations connected to the device.
Examples:
-> maclock show
MAC locking is globally enabled
Port Port
Number Status
________ ________ ________
1 Disabled Disabled
2 Disabled Disabled
3 Disabled Disabled
4 Disabled Disabled
5 Disabled Disabled
6 Disabled Disabled
7 Enabled
8 Disabled Disabled
9 Disabled Disabled
----- More -----
-> maclock show stations
Port Number
___________
7
Trap Max Static
Status Allocated
____________ ________________
Disabled
MAC Address
___________________
00:00:1D:B1:11:01
Max FirstArrival
Allocated
1 10
2 20
3 30
4 40
5 50
20 600
1
20 600
20 600
Status
_____________
Active
Built-in Commands
Violating
MAC Address
________________
1 00:00:1D:B1:10:F3
State
_______________
first learned
Network Tools Screens 12-17