Enterasys SmartSwitch 6000 User Manual page 351

maclock
Description:
Configures the MAC locking feature per port. When enabled, either a static
MAC is locked to the port, or the first MAC seen on the port is locked to that
port. Only incoming traffic with the locked MAC as the source MAC address
shall be forwarded. If traps are enabled, then the first MAC that differs from
the locked MAC is sent as a trap to management.
Syntax:
maclock show [ port# | all ]
maclock show stations [ port# | all ] [firstarrival [ port# | all ] ]
[ static [ port# | all ] ]
Displays the status of MAC locking globally or on one or more ports, as
well as whether or not MAC lock trap messaging is enabled or disabled,
the maximum static and end station MAC addresses allowed locked to
each port, and any MAC address(es) violating the maximum static and first
arrival value(s) set for each port.
Displays MAC locking information about first arrival, static (management
defined) or all end stations connected to the device.
Built-in Commands
Network Tools Screens 12-15