Snmp Traps Configuration Screen Field Descriptions - Enterasys SmartSwitch 6000 User Manual

Screen Example
Figure 4-5 SNMP Traps Configuration Screen
Field Descriptions
Refer to Table 4-5 for a functional description of each screen field.
Table 4-5 SNMP Traps Configuration Screen Field Descriptions
Use this field...
Trap Destination
(Modifiable)
Trap Community
Name
(Modifiable)
Enable Traps
(Toggle)
To...
Set the IP address of the workstation to receive trap alarms. Up to eight
different destinations can be defined.
Enter the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Enable transmissions of the trap to the network management station
with the associated IP address. This field toggles between YES
and NO.
SNMP Traps Configuration Screen
Chassis Menu Screens 4-15