Table of Contents
Advertisement
The lower section of the RACER™ Configuration Mode box has
2.
two radio buttons that show whether the unit is in Online (Cloud-
Managed) mode, or Offline mode.
3.
If the unit is not in the correct mode, click the Online (Cloud-
Managed) or Offline radio button as needed.
• A confirmation dialog will be shown, asking if you want to
4.
To switch the radio to the chosen mode, click the Confirm button.
• A ten-second countdown will be shown.
• The Configurator interface web page will reload.
• The unit will be switched to the chosen configuration mode.
Uploading a device configuration file from FM Racer
A FM Racer device configuration template contains a set of pre- configured
parameters that can be customized and applied to a single Fluidmesh
device, or to a group of devices.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Figure 21. Fluidmesh Configurator (landing page)
switch the unit to the chosen mode.
Page 59 of 177
Advertisement
Table of Contents
