Table of Contents
Advertisement
4.
To show the password as it is being typed, check the Show
Password check-box.
5.
Save the Viewmode Credentials settings by clicking the Change
button. Alternatively, clear the settings by clicking the Reset
button.
To change the View Mode settings, do the following steps:
1.
Log in to the unit's Configurator GUI with Administrator
credentials. See
configuration" (page 48)
2.
Click the -view mode settings link under MANAGEMENT
SETTINGS in the left-hand settings menu
Figure 53. Configurator GUI (VIEW MODE SETTINGS dialog)
• The VIEW MODE SETTINGS dialog will be shown.
3.
To allow or prohibit access to any device-configuration settings,
click the relevant drop-down, and click the Disabled or Enabled
setting:
• If the Disabled option is selected for a device-configuration
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
"Accessing the Cisco FM3500 Endo for device
for more information.
setting, the setting for that category will be visible but not
accessible to ordinary users.
(Figure 53 (page
125)).
Page 125 of 177
Advertisement
Table of Contents
