Table of Contents
Advertisement
8.
The factory-set login details are as follows:
• Username: admin
• Password: admin
9.
Enter the correct username and password. Press 'Enter'.
If your browser shows a time-out or similar message, the
computer may be trying to access the Fluidmesh device through
a proxy server. To resolve the issue, do the following steps:
1. Go to Control Panel > Internet Options > Connections
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Figure 14. Security certificate warning
(Google Chrome)
2.
Click Proceed to [the URL] (unsafe).
• The device login window will be shown:
Figure 15. Fluidmesh device login
window
> LAN Settings.
Page 51 of 177
Advertisement
Table of Contents
