Table of Contents
Advertisement
Figure 20. Fluidmesh Configurator (landing page)
2.
The lower section of the RACER™ Configuration Mode box has
two radio buttons that show whether the unit is in Online (Cloud-
Managed) mode, or Offline mode.
3.
If the unit is not in the correct mode, click the Online (Cloud-
Managed) or Offline radio button as needed.
• A confirmation dialog will be shown, asking if you want to
switch the unit to the chosen mode.
4.
To switch the radio to the chosen mode, click the Confirm button.
• A ten-second countdown will be shown.
• The Configurator interface web page will reload.
• The unit will be switched to the chosen configuration mode.
Uploading a device configuration file from FM Racer
A FM Racer device configuration template contains a set of pre-
configured parameters that can be customized and applied to a single
Fluidmesh device, or to a group of devices.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Page 59 of 174
Advertisement
Table of Contents
