Table of Contents
Advertisement
2.
Connect a computer to the Fluidmesh device.
3.
Launch the offline Configurator interface.
4.
Switch to Online Cloud-Managed mode as shown in the
Switching between offline and online modes section of your
device's Installation and Configuration manual.
5.
Adjust the device configuration as needed using the Fluidmesh
Partners Portal.
© 2021 Cisco and/or its affiliates. All rights reserved.
NOTE
As of October 2018, the most current firmware
versions are as follows:
1.2.1 (FM1000 Gateway and FM10000
Gateway gateways)
7.5.1 (FM FM1200 Volo)
8.2.1 (All FM x200 variants)
9.0.1 (All FM x500 variants)
Troubleshooting
Page 158 of 177
Advertisement
Table of Contents
