Operation
Operating Instructions 868-M - 01.0 - 12/2020
To activate the increased sewing foot stroke using the knee button:
1.
Set the toggle switch (1) of the knee button (2) to the desired
function:
• Push-to-run mode: Set the toggle switch (1) to position 0.
• Hold-to-run mode: Set the toggle switch (1) to position 1.
4.12 Lifting the sewing feet
The machine offers different ways to lift the sewing feet depending
on its equipment:
• ECO machines: mechanically using the knee lever ( p. 61)
• CLASSIC machines: electropneumatically using the pedal
( p. 62)
4.12.1 Mechanical lifting with the knee lever
Fig. 39: Mechanical lifting with the knee lever
①
(1) - Knee lever
To lift the sewing feet mechanically using the knee lever (1):
1.
Use your right knee to push the knee lever (1) to the right.
The sewing feet remain open while the knee lever (1) is
pushed to the right.
61