Data Saved By [Initial Status Define]; Error Messages - Sony MVS-3000 System User Manual

Included in Switcher Setup
Menu No. Menu path
3221 Misc >Safe Title
7322.5 Engineering Setup >Panel >Xpt Assign >Main,V/K Pair
Assign
7322.6 Engineering Setup >Panel >Xpt Assign >Src Name/
Src Color
7326.2 Engineering Setup >Panel >Operation >Effect Mode
7331 Engineering Setup >Switcher >Config
7332 Engineering Setup >Switcher >Input
7333 Engineering Setup >Switcher >Output
7334 Engineering Setup >Switcher >Transition
7335 Engineering Setup >Switcher >Key/Wipe/FM/CCR
7336 Engineering Setup >Switcher >Link
7337 Engineering Setup >Switcher >Device Interface

Data Saved by [Initial Status Define]

Included in Panel
Menu No. Menu path
- -
6351 Snapshot >Key Snapshot >Attribute
Included in Switcher (Same as data saved in Snapshots)
Menu No. Menu path
- -
3211 Misc >Enable >Port Enable
3213 Misc >Enable >Side Flags

Error Messages

Error messages appear in the following three formats.
• A list display in the Error Status menu (7411)/Error Log
menu (7412)
298
Error Messages
Saved data
All data relating to Safe Title menu
Cross-point assignment settings (excluding <Xpt Shift
Mode> and <Display Shift Mode> groups)
Names of source signals
Setting of [Default KF Duration] for switcher keyframes
All data relating to Config menu
All data relating to Input menu
All data relating to Output menu
All data relating to Transition menu
All data relating to Key/Wipe/FM/CCR menu
All data relating to Link menu
All data relating to Device Interface menu
Saved data
• Settings for the following cross-point control block buttons
- Delegation buttons assigned to the 1st row
- [1ST ROW DSPLY], [2ND ROW DSPLY], [SHIFT], [MCRO ATTCH
ENBL]
• Transition control block: [KF], [SHIFT], and independent key transition
[KEY1] to [KEY4] buttons
• Flexi Pad: Settings for the [WIPE], [DME WIPE], [SNAPSHOT], [EFF],
[SHOTBOX], [MCRO], [TRNS RATE], [KEY ADJ], [KEY SS] buttons
Settings of <Recall Mode> group
Saved data
• For each M/E, setting data relating to the following:
cross-points, transitions, Key1 to Key4 (including independent key
transition settings), wipes, DME wipes
• Color backgrounds 1/2
• Frame memory
• AUX bus (including CCR settings)
Setting data for <Switcher> group
All data relating to Side Flags menu
• Message boxes
• List based on the Error Information menu (9900)