Safety Precautions - AGFA CR 25.0 User Manual

Safety precautions

General safety instructions
• For software and other technical platforms, and/or if valid in combination with any
consumable, which constitute, after installation, a system for the interpretation of
medical image data by trained and qualified professionals: it is the user's
responsibility to ensure that image quality, display quality, environmental lighting and
other possible distractions are consistent with the clinical application.
• Make sure that the CR 25.0 is constantly monitored in order to avoid inappropriate
handling, especially by children.
• Only trained service personnel must make repairs. Only authorized service personnel
must make changes to the CR 25.0.
• If there is any visible damage to the machine casing, do not start nor use the
CR 25.0.
• If you want to connect the CR 25.0 with other devices, components or assemblies and
if the technical data do not allow determining whether the combination with these
devices, components or assemblies involves hazards, you must consult the
respective manufacturers to avoid danger for operating personnel or the environment.
• Do not override or disconnect the integrated safety features.
• As is the case for all technical devices, the CR 25.0 must be operated, cared for and
serviced correctly.
• If you don't operate the CR 25.0 correctly or if you don't have it serviced correctly,
Agfa-Gevaert is not liable for resulting disturbances, damages or injuries.
• When installing the CR 25.0, care must be taken to ensure that there is either a mains
plug or an all-cable disconnecting device in the internal installation fitted near the
CR 25.0 and that it is easily accessible.
• If you notice conspicuous noise or smoke, disconnect the CR 25.0 immediately.
• Check that the mains voltage is within the specified range of the self adapting power
supply of the machine.
Markings and labels
Always take into account the markings and labels provided on the inside and out-
side of the machine. A brief overview of these markings and labels and their
meaning is given below.
8
2312A EN 20040909