Switching Off The Cr 25.0 - AGFA CR 25.0 User Manual

Switching off the CR 25.0

Before switching off
Check that the CR 25.0 is not scanning an image plate. If the CR 25.0 is scanning
an image plate, the status indicator at the top of the machine is green and
flashing.
Switching off
It is recommended to switch off the CR 25.0 at the end of the day.
Leave the CR 25.0 on if you intend to use it overnight. Switching on the
CR 25.0 takes approximately 3 minutes. During this time emergency
digitizing is not possible!
Place the main switch in position '0'.
26
2312A EN 20040909