3
Insert the cassette containing the image plate into the cassette slot of the
CR 25.0 as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking
mechanism [2] at the bottom.
While treating the image plate, the CR 25.0 will display the following screen:
Miller
CR 25.0
The CR 25.0:
• reads the cassette identification data;
• converts the information of the latent image to digital data;
• erases the image plate and re-inserts it into the cassette;
• gives the cassette ID data the status 'erased';
• returns the cassette;
• transmits the digital image data to the image processing station ('destination').
When the CR 25.0 has treated the cassette, it displays the operator main screen.
❖
If the CR 25.0 displays an error message, refer to
on page 54.
30
1
2
Chest AP
BUSY
'Troubleshooting checklist'
2312A EN 20040909