AGFA CR 25.0 User Manual page 32

Reading an image plate in the dedicated configuration
In the dedicated configuration, the CR 25.0 can digitize the image plate while
you are entering the identification data via the ID Station.
To read an image plate:
1 Check that the CR 25.0 is ready for operation:
• The CR 25.0 must display the operator main screen with 'Ready' status, e.g.:
QS not ready
CR 25.0
• The status indicator at the top of the CR 25.0 must be green and be lit constantly.
❖
The CR 25.0 is operational if the status field equals 'READY', even if status
messages of the destination are shown (e.g. 'QS not ready').
2 Press the appropriate emergency button at the front of
The emergency button determines the speed class, i.e. the sensitivity, which will be
used to digitize the image plate.
The button which you have pressed will be lit and the display will read:
Please enter unidentified cassette
CR 25.0
32
For digitizing images of the trunk.
For digitizing images of the limbs.
or press to cancel
READY
BUSY
DIRECT ID
Status field
the CR 25.0.
2312A EN 20040909