AGFA CR 25.0 User Manual page 45

Re-erasing image plates with status 'to be erased'
To re-erase an image plate which you have given the status 'to be erased' via the
ID station:
1 Check that the CR 25.0 is ready for operation:
• The CR 25.0 must display the operator main screen with 'Ready' status, e.g.:
CR 25.0
• The status indicator at the top of the CR 25.0 must be green and be lit constantly.
2 Insert the cassette into the cassette
The CR 25.0 will automatically erase the image plate. The display will read:
CR 25.0
When the CR 25.0 has erased the image plate, it displays the operator main screen.
3 Remove the cassette from the cassette slot.
2312A EN 20040909
* * * ERASING * * *
READY
slot.
BUSY
Status
45