AGFA CR 25.0 User Manual page 55

Status field:
Error field:
IP JAM
Status field:
MESSAGE 1
ERASURE LAMP
[X], [Y], [Z] DEFECTIVE
SCANNER WARNING
[PPNAME] NOT READY
CORRUPTED
MESSAGE IN QUEUE
UNKNOWN
DESTINATION
[PPNAME]
ERROR WHILE
LOADING LANGUAGE
FILE
2312A EN 20040909
ERROR
'CODE XXXXX
'
1. Remove right side
panel
2. Put plate back
into cassette.
3. Close right side
panel.
WARNING
Message 2
Press to
complete, IP is not
erased
Possible bad image,
press
Please check and
press
Please press and
check queue
Please press and
check queue
Default language is
used, please
press
Refer to 'Solving image plate
and cassette jams'
of the Reference manual.
Action
• Press Confirm key.
• Refer to 'Replacing the
erasure lamps' on page
the Reference manual.
• Press Confirm key.
• Contact your local service
organization.
• Check image processing
station.
• If image processing station is
ready, press Confirm key.
• Press Confirm key.
• Refer to 'Consulting the
image transmission queue
('Queue management')'
page 54 of the Reference
manual.
• Press Confirm key.
• Refer to 'Consulting the
image transmission queue
('Queue management')'
page 54 of the Reference
manual.
• Press Confirm key. English
will be used.
• Restart CR 25.0.
• If the problem persists,
contact your local service
organization.
on page 106
98 of
on
on
55