AGFA CR 25.0 User Manual page 34

4 Enter the identification data via the ID Station.
For detailed information, refer to the User manual of the ID Software.
As soon as you have entered the identification data, the CR 25.0 displays:
Miller
CR 25.0
As soon as the CR 25.0 has digitized the entire image plate and you have entered
the identification data:
• the CR 25.0 erases the image plate and re-inserts it into the cassette;
• the CR 25.0 gives the cassette ID data the status 'erased'.
• the cassette is returned to the cassette slot;
• the digital image data is sent to the image processing station ('destination').
When the CR 25.0 has treated the cassette, it displays the operator main screen.
5 Remove the cassette from the cassette slot.
When the CR 25.0 returns the cassette, it is ready to be re-used
immediately. However, if you leave it for more than 3 days before re-using it,
you must re-erase it first. Refer to
34
BUSY
Chest AP
'Re-erasing an image plate' on page 42.
2312A EN 20040909