AGFA CR 25.0 User Manual page 33

3 Insert the cassette containing the image plate into the cassette slot of the
CR 25.0 as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking
mechanism [2] at the bottom.
1
The CR 25.0 starts digitizing the image plate. You can enter the identification data,
refer to step 4.
While treating the image plate, the CR 25.0 will display the following screens:
CR 25.0
or press
CR 25.0
The CR 25.0 converts the information of the latent image to digital data.
❖
If the CR 25.0 displays an error message, refer to
operation ('Key-operator
2312A EN 20040909
2
please wait
Identify at ID station
to use emergency data
mode')'.
BUSY
DIRECT ID
BUSY
DIRECT ID
Chapter 3, 'Advanced
33