AGFA CR 25.0 User Manual page 39

Reading an emergency image plate in the dedicated configuration
In the dedicated configuration, you can digitize unidentified emergency image
plates. The digital image data will be assigned default ID data.
To digitize an emergency image plate, you must press the Confirm key after
you have inserted the cassette (refer to step 4). Image data transmission to
the preview and the image processing station will be suspended until you
have pressed the Confirm key.
To read an emergency image plate:
1 Check that the CR 25.0 is ready for operation:
• The CR 25.0 must display the operator main screen with 'Ready' status, e.g.:
QS not ready
CR 25.0
• The status indicator at the top of the CR 25.0 must be green and be lit constantly.
❖
The CR 25.0 is operational if the status field equals 'READY', even if status
messages of the destination are shown (e.g. 'QS not ready').
2 Press the appropriate
The emergency button determines the speed class, i.e. the sensitivity, which will be
used to digitize the image plate.
For digitizing images of the trunk.
For digitizing images of the limbs.
2312A EN 20040909
emergency button at the front of the
Status field
READY
CR 25.0.
39