Operating Modes - AGFA CR 25.0 User Manual

Operating modes

The CR 25.0 can be operated in three modes: operator mode, key-operator mode,
and service mode.
Operator mode
The operator mode groups all basic functions which are aimed at radiographers:
• Reading an image plate;
• Reading an emergency image plate;
• Re-erasing an image plate;
• Reading the identification data of a cassette (Dedicated configuration only);
• Changing the image plate type (Dedicated configuration only).
All functions of the operator mode are described in
('Operator mode')'.
Key-operator mode
The key-operator mode groups advanced functions which are aimed at
technicians.
The key-operator mode can be accessed via the Key-operator key on the keypad
and is menu-driven. The key-operator functions are described in
'Advanced operation ('Key-operator
Service mode
The service mode functions are reserved for trained service personnel. They are
password protected.
2312A EN 20040909
Chapter 2, 'Basic operation
mode')'.
Chapter 3,
13