AGFA CR 25.0 User Manual page 37

Reading emergency image plates without ID data
To read an emergency image plate without ID data:
1 Check that the CR 25.0 is ready for operation:
• The CR 25.0 must display the operator main screen with 'Ready' status, e.g.:
CR 25.0
• The status indicator at the top of the CR 25.0 must be green and be lit constantly.
❖
The CR 25.0 is operational if the status field equals 'READY', even if status
messages of the destination are shown (e.g. 'QS not ready').
2 Press the appropriate
The emergency button determines the speed class, i.e. the sensitivity, which will be
used to digitize the image plate.
For digitizing unidentified emergency images of the trunk.
For digitizing unidentified emergency images of the limbs.
The button which you have pressed will be lit and the display will read:
Please enter unidentified cassette
CR 25.0
The emergency status will only be assigned to the first image plate which
you insert in the CR 25.0 cassette slot after pressing the emergency button.
2312A EN 20040909
emergency button at the front of the
EMERG. BUTTON
WARNING
or press to cancel
READY
READY
Status field
CR 25.0.
37