Configurations - AGFA CR 25.0 User Manual

Configurations

The CR 25.0 can be used in two configurations: either one or more ID Stations
serve a range of Digitizers, or one ID Station is dedicated to one Digitizer. For the
ID Station a CR User Station with included ID Tablet can be used as well as a
stand-alone ID Tablet. The ID Software installed on the PC is slightly different
depending on the configuration. For more information, contact your local service
organization.
Interchangeable configuration
One or more ID Stations can serve a range of Digitizers, provided that each ID
Station has an ID Tablet. There is no physical link required between the ID Station
and the Digitizer.
In this configuration, a cassette can be identified via any of the ID Stations and
subsequently be scanned using any of the Digitizers. The patient demographic
data and examination data are entered via the ID Viewer Software and stored in
the memory chip of the ADC cassette via the ID Tablet. As a result the
identification data are linked to the cassette and any Digitizer can be used to scan
the cassette.
The interchangeable configuration allows the flexible use of several Digitizers and
ID Stations depending on the workload.
CR 25.0
ID Station with
ID Tablet
14
Interchangeable configuration
2312A EN 20040909