The User Interface - AGFA CR 25.0 User Manual

The user interface

The CR 25.0 has three operation modes:
• the operator mode for basic operation;
• the key-operator mode for advanced operation;
• the service mode reserved for trained service personnel.
The functions of the operator mode are described in
('Operator mode')'. An overview of the functions of the key-operator mode is given
in 'Survey of advanced functions ('Key-operator mode')'
information on the key-operator mode, refer to the CR 25.0 Reference manual.
The CR 25.0 interfaces with the user via:
• a keypad and a display;
• a status indicator;
• emergency buttons;
• audio signals.
1 2
16
3
Chapter 2, 'Basic operation
on page 52. For detailed
1 Status indicator
2 Emergency buttons
Keypad and display
3
2312A EN 20040909