AGFA CR 25.0 User Manual page 19

The display
The CR 25.0 control panel has a backlit LCD display with 8 lines of
40 characters each. Its lay-out depends on the operating mode.
◆
In operator mode, the display has dedicated areas for specific information:
8.1
8.2
8.3
1 Set-up of image processing station:
• [blank]: Default image processing station selected.
• Off line: Transmission to all image processing stations disabled.
• [process.station] not ready: Image processing station not available.
• [process.station] rerouted: Images rerouted to other image processing
station (ask the Agfa service technician if your system supports this
configuration).
Type of message
2
Extra comment or action to take
3
System status:
4
• READY: The CR 25.0 is ready for operation.
• BUSY: The CR 25.0 is treating an image plate.
• ERROR: An error has occurred. Refer to
page 54.
• LOCKED: id.
• WARNING: id.
2312A EN 20040909
2
1
Set-up
1ST MESSAGE
2nd Message
Patient_Last_Name
Patient_Last_Name
Patient_Last_Name
Station Name
7
3 4
STATUS
OPERATION MODE
Sub_Exam
Sub_Exam
Sub_Exam
ERROR
'Troubleshooting checklist'
5
6
on
19