AGFA CR 25.0 User Manual page 56

Status field:
MESSAGE 1
PARTLY SCANNED IP
DETECTED
Status field:
MESSAGE 1
IP NOT SUFFICIENTLY
ERASED
EMPTY CASSETTE
CASSETTE WRITE
ERROR
WRONG CASSETTE
CASSETTE
IDENTIFICATION
ERROR
CASSETTE READ/
WRITE ERROR
56
WARNING
Message 2
Possible loss of
image, press
LOCKED
Message 2
Press and erase
again
Press to get
cassette
Press to get
cassette
Press and remove
cassette.
Press , remove
and identify
Press , remove
and try again
Action
• Press Confirm key.
• Check image at destination.
Action
• Press Confirm key.
• Refer to 'Re-erasing an
image plate' on page 42.
• Press Confirm key.
• Remove cassette.
• Insert cassette containing
image plate.
• Press Confirm key.
• Remove cassette.
• Use another cassette.
• If problem persists with other
cassettes, contact your local
service organization.
• Press Confirm key.
• Remove cassette.
• Insert correct cassette in the
right way.
• Press Confirm key.
• Remove cassette.
• Re-identify cassette.
• Re-insert cassette.
• Press Confirm key.
• Remove cassette.
• Re-insert cassette.
• If problem persists, initialize
and identify cassette via ID
Station.
• If problem persists with other
cassettes, contact your local
service organization.
2312A EN 20040909