Daikin Perfera RXM R Series Service Manual page 201

To install the wifi control PCB wiring harness
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
4 Route the wiring harness out of the harness retainers and remove the wifi
control PCB wiring harness.
5 To install the wifi control PCB wiring harness, see
1 Connect the wiring harness connector to the indoor unit main PCB.
WARNING
When reconnecting a connector to the PCB, make sure to connect it on the correct
location and do NOT apply force, as this may damage the connector or connector
pins of the PCB.
2 Route the wiring harness through the appropriate harness retainers towards
the wifi control PCB.
3 Connect the wiring harness to the wifi control PCB.
4 Fix the wiring harness using new tie straps (if needed).
Is the problem solved?
Yes
No
3
|
"Repair procedures" [
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
Components
4
199].
Service manual
201