Daikin Perfera RXM R Series Service Manual page 177

To install the swing flap motor wiring harness
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
c
a Screw (drain hose)
b Drain hose
c Swing raster motor cover
4 Remove the swing raster motor cover.
5 Disconnect the wiring harness from the swing raster motor.
6 Remove the swing flap motor wiring harness.
7 To install the
4
procedures" [ 199].
1 Connect the wiring harness connector to the swing raster motor.
2 Install the swing raster motor cover.
c
a Screw (drain hose)
b Drain hose
c Swing raster motor cover
3 Install the drain hose on the indoor unit.
4 Install the drain hose fixation bracket. Install and tighten the screw.
5 Install the swing flap motor, see
Is the problem solved?
Yes
No
b a
swing flap motor
b a
"Repair procedures" [
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
3 Components
|
wiring harness, see
4
175].
"Repair
Service manual
177