Avaya 6424D+M User Manual page 81

2. Press .
[START]
Listen for dial tone.
3. Dial the Remote Access Change barrier code.
Listen for dial tone.
4. Dial new barrier code.
Listen for tone:
Confirmation tone—barrier code is changed.
Intercept tone—invalid code dialed. Press
5. Press
[RELEASE]
ATND light goes off. PA light goes on.
Restrictions—Attendant Control of Voice Terminals
You can assign any one of the following six kinds of restrictions to selected extension
numbers or groups of extension numbers:
Outward: Denies direct-dialed calls to the public and private networks. Calls to the
attendant, calls to other telephones/voice terminals, and incoming calls are not affected.
Restricted calls will be routed to intercept tone.
Terminal-to-terminal:
Origination of calls is not affected. Restricted calls are routed to intercept tone.
Outward and terminal-to-terminal: Combines both of these restrictions.
Total: Denies all service to an extension number. An attempted call origination or a call from
another telephone/voice terminal will be routed to intercept tone. An incoming direct-dialed
call will be routed to the attendant or to a recorded announcement, depending on your
system.
Termination: Denies all received (incoming) calls to provide a form of "do-not-disturb"
service. Incoming direct-dialed calls will be routed to the attendant or to a recorded
announcement, depending on your system. Other restricted calls will be routed to intercept
tone.
Outward and termination: Combines both of these restrictions.
You can restrict an extension number by dialing the Controlled Restriction access code for
one extension number and by dialing a code number for the specific restriction to be
assigned.
.
Denies incoming calls from other telephones/voice terminals.
CHAPTER 4. OPERATING FEATURES
, and repeat the procedure.
[RELEASE]
4-59