Avaya 6424D+M User Manual page 55

Display the ARS plan first to see what the current route plan is. PLAN light is always lighted
when the ARS plan is under your control.
To display ARS plan:
1. Press, and hold
Display shows current route plan.
2.
Release .
[PLAN]
Display goes off.
To place ARS route plan under your control or to change ARS route plan:
1. Press an idle loop button.
ATND light goes on. PA light goes off.
2. Press , or
[PLAN]
Listen for dial tone. Display shows current route plan.
Dial 1, 2, or 3.
3.
Listen for confirmation tone.
Display shows A1, A2, or A3.
4.
Press .
[RELEASE]
Display and ATND lights go off. PA light goes on.
To return ARS route plan to automatic control:
1. Press an idle loop button.
ATND light goes on. PA light goes off.
2. Press , or
[PLAN]
Listen for dial tone. Display shows current route plan.
Dial 0 .
3.
Listen for confirmation tone.
ARS returns to automatic control. Display shows 1, 2, or 3. PLAN light goes off.
.
[PLAN]
. Dial ARS Network Change Code.
[START]
The letter A indicates attendant control.
. Dial ARS Network Change Code.
[START]
CHAPTER 4. OPERATING FEATURES
4-33