Avaya 6424D+M User Manual page 68

CHAPTER 4. OPERATING FEATURES
To arrange a conference requested by an outside party:
1. Acknowledge the request for a conference, and verify that conference BUSY light is
off. (BUSY light is on only when all conference circuits are busy.)
2. Press .
[CONF]
Associated CONT light goes on. Display light goes off.
If Call Detail Recording and Reporting (CDRR) is assigned and calls are to be
3.
charged to an account number, do Steps 4 and 5; if CDRR is not assigned, go to
Step 6.
4. Press .
[START]
Listen for dial tone.
5. Dial CDRR account
Listen for dial tone.
If an outside party is the first added-on conferee, you do not have to activate CDRR
6.
again. The added-on trunk will be automatically recorded. Do a, b, or c to connect a
trunk:
a. Dial AAR/ARS access code.
Listen for dial tone.
b.
Press direct trunk group select button.
Listen for dial tone. ANS light goes on.
c. Press
Listen for dial tone. ANS light goes on. Other conferee is separated from the
connection.
7. Dial the outside number.
Listen for ringback tone until called party answers. If you used AAR/ARS to connect
a trunk, ANS light goes on.
8. Announce the conference, and do a or b.
To add the conferee, press
a.
ANS and SPLIT lights go off.
4-46
SPLIT light goes on. Caller is separated from the connection.
number access code and Account Charge Number.
, and dial Trunk Group access code.
[START]
[CONF]
.