Avaya 6424D+M User Manual page 66

CHAPTER 4. OPERATING FEATURES
To arrange a conference requested by a telephone/voice terminal user:
1. Acknowledge the request, and verify that the CONF BUSY light is off. If you are
requested to add an additional conferee to an existing conference, go to Step 3.
2 .
Press .
[CONF]
Associated CONT light goes on. Display light goes off. Voice
connected to the conference circuit.
3.
To add each conferee (voice terminal user), do a, b, and c. To add
go to Step 1 under "To add an outside party".
Press the appropriate hundreds group select button,
a.
Group select light goes on.
b. Check the BLF to see if desired extension is idle (associated
c. Press DXS button for the desired extension number.
Listen for ringback tone. SPLIT light, associated BLF and RING lights go on.
When called user answers, ANS light goes on. RING light goes off.
4. Announce the conference, and do a or b.
To add the conferee, press
a.
ANS and SPLIT lights go off.
b.
If unable to add the conferee, press
Extension is released. You have reestablished a connection with the
conference. Advise the conferees.
To add an outside party:
1. If you want to add an outside party and if Call Detail Recording and Reporting
(CDRR) is assigned and calls are to be charged to an account number, do Steps 2
and 3; if (CDRR) is not assigned, go to Step 4.
Press .
2.
[START]
Listen for dial tone. SPLIT light goes on. Other conferees are separated from the
connection.
Dial CDRR account number access code and Account Charge Number.
3.
Listen for dial tone.
4-44
.
[CONF]
.
[CANCL]
terminal user is
an outside party,
light is off).